Pallet Truck Manufacturers

What are the common faults that may occur during the use of pallet trucks, and how to eliminate them?

Common faults that may occur during the use of pallet trucks and their elimination methods, combined with the professional field of Hecha Intelligent Equipment Co., Ltd., are analyzed as follows:

Common faults and elimination methods
Drive wheel speed reduction
Phenomenon: During the use of the pallet truck, the speed of the drive wheel suddenly decreases.
Cause:
The battery voltage is too low or the resistance at the joint is too large.
The gear box of the drive head and the connected bearings lack lubricating oil.

Troubleshooting method:
Check the load voltage and clean the joints to ensure good contact.
Check the lubricating oil condition, clean it and refill it with new lubricating oil.

Brake system failure
Phenomenon: The braking effect of the pallet truck is poor or the brake fails.
Cause:
The brake is loose or falls off, or the gap between the brake pads is too large.
The disk coil of the brake is short-circuited inside.

Troubleshooting method:
Reinstall and adjust the brake to ensure that it is in the correct position and state.
Replace a new disk coil to restore the normal operation of the brake.

Powerless or unable to lift heavy objects
Phenomenon: When lifting heavy objects, the pallet truck is powerless or unable to lift.
Cause:
The hydraulic system pipeline is leaking oil.
The motor rotation speed of the hydraulic oil pump is too low.
Troubleshooting method:
Find the leaking pipeline and repair it to ensure the normal operation of the hydraulic system.
Check the drive motor, find and solve its faults to increase the rotation speed of the hydraulic oil pump.

Insufficient lifting or fork does not return to the original position
Phenomenon: The lifting height of the pallet truck is insufficient, or the fork does not return to the original position after lifting.
Cause:
Insufficient or excessive hydraulic oil.
The rotating part of the pallet truck is deformed and stuck, or the plunger and the guide rod thread sleeve are stuck.
Troubleshooting method:
Add properly filtered working oil to ensure the appropriate amount of hydraulic oil.
Replace deformed parts, repair stuck parts, and ensure the normal operation of the pallet truck.

Solutions from Hecha Intelligent Equipment Co., Ltd.

As a professional pallet truck manufacturer, Hecha Intelligent Equipment Co., Ltd. provides comprehensive solutions, including:

High-quality logistics equipment: The company provides internal combustion counterbalanced forklifts, battery counterbalanced forklifts, electric logistics handling equipment, etc. to meet logistics needs in various scenarios.

Professional maintenance services: For common faults of pallet trucks, the company provides professional maintenance services, including on-site repairs, regular maintenance and emergency troubleshooting.

Customized solutions: According to the specific needs of customers and the working environment, the company provides customized pallet truck solutions to ensure efficient operation of the equipment and customer satisfaction.