Maintenance methods for electric hydraulic forklifts？

1. During the test drive, the wheels should be lifted so that even if there are connection errors, there will be no danger. 2. When charging the battery, the charging circuit must be completely disconnected from the chopper, as in addition to affecting the charging of the charger, the overvoltage generated by the charger can also damage the chopper. 3. Special attention should be paid to the wiring from the battery to the electronic control, which should be arranged in parallel and as short as possible.

4. It is recommended to implement forced ventilation for the controller when the vehicle operates in places with harsh working conditions and difficult ventilation.

5. Drivers should try to avoid unsafe operations such as not slowing down when turning, driving when the load increases, overloading forklifts, and driving on sloping or soft ground.

6. Regularly clean the dust inside the DC motor, check the carbon brush and spring.

7. Batteries should be regularly refilled with distilled water (pure water).

8. If electric forklifts are not used for a long time, the battery should be fully charged and stored. And keep charging at a frequency of about 1-2 months apart.